1f Switch Static IP address Configuration

!!! To manage Telnet, SSH Session on a Switch we need IP address !!! Enter Vlan1 Configuration Mode Sw1(config)# interface vlan1 Sw1(confi...

!!! To manage Telnet, SSH Session on a Switch we need IP address

!!! Enter Vlan1 Configuration Mode

Sw1(config)#interface vlan1

Sw1(config-if)#ip address 10.0.0.10 255.0.0.0

Sw1(config-if)#no shutdown

Sw1(config-if)#exit

Sw1(config)#ip default-gateway 10.0.0.100

Verify Command’s

Sw1# show running-config

Sw1# show ip interface vlan1

Sw1# show ip interface brief

Sw1# copy running-config startup-config

Lets Verify SSH Session

!!! Fire up Putty and enter the ip address of Switch and Select SSH as Protocol

 

!!! Enter Username and Password to authentication 

Sw1(config)#show line

 

!!! “*“ shows that one VTY Session is active

Sw1#show vlan

!!! By Default all ports are member of Vlan 1

The connectivity is established between all ports because they are in the same Vlan.

Next Lab 1h  Configure VLAN & assign interface